FRAZEE INDUSTRIES INC -- MIRRO GLIDE GLOSS WHITE, 1430001  -- 8010-00N077056
<pre>=====================  Product Identification  =====================

Product ID:MIRRO GLIDE GLOSS WHITE, 1430001
MSDS Date:09/23/1996
FSC:8010
NIIN:00N077056
=== Responsible Party ===
Company Name:FRAZEE INDUSTRIES INC
Address:6625 MIRAMAR RD
City:SAN DIEGO
State:CA
ZIP:92121
Country:US
Info Phone Num:619-276-9500
Emergency Phone Num:619-543-6000
Preparer's Name:ZEKE
CAGE:1GK99
=== Contractor Identification ===
Company Name:FRAZEE INDUSTRIES INC
Address:6625 MIRAMAR RD
City:SAN DIEGO
State:CA
ZIP:92121
Country:US
Phone:858-626-3600
CAGE:1GK99

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPIONIC ACID, 2-METHYL-, MONOESTER W/2,2,4-
    TRIMETHYL-1,3-PENTANEDIOL; (2,2,4-TRIMETHYL-1, 3-PENTANEDIOL
    MONOISOBUTYRATE). VP:0.004 @ 68F.
CAS:25265-77-4
RTECS #:UF6000000
Fraction by Wt: 5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ETHANOL, 2-(2-METHOXYETHOXY)-; (DIETHYLENE GLYCOL
    MONOMETHYL ETHER). VP:1 @ 68F.
CAS:111-77-3
RTECS #:KL6125000
Fraction by Wt: 3%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PHTHALIC ACID, DIBUTYL ESTER; (DIBUTYL PHTHALATE)  (SARA
    313) (CERCLA). VP:0.0004 @ 68F.
CAS:84-74-2
RTECS #:TI0875000
Fraction by Wt: 2%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:VAPOR OR MIST CAN
    CAUSE HEADACHE, NAUSEA AND IRRITATION OF THE NOSE, THROAT AND
    LUNGS. INGESTION:MAY BE HARMFUL OR FATAL IF SWALLOWED. INGESTION
    MAY CAUSE NAUSEA, VOMITING, DIARRHEA A ND GASTROINTESTINAL
    IRRITATION. CHRONIC:NONE EXPECTED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:OVEREXPOSURE TO VAPORS CAN CAUSE
    HEADACHES, DIZZINESS AND NAUSEA.

=======================  First Aid Measures  =======================

First Aid:SKIN:CLEAN W/SOAP & WATER. DRY CONTAMINATED CLOTHING BEFORE
    REUSE. INGEST:CONSULT MD. INHAL:REMOVE TO FRESH AIR. EYE:FLUSH
    W/FRESH WATER FOR AT LEAST 15 MINUTES. IF IRRITATION PERSISTS, GET
    MEDICAL AT TENTION.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . WATER MAY BE USED TO COOL CLOSED CNTNRS TO PREVENT
    PRESSURE BUILD UP WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:POLYMER FILM CAN BURN. MATERIAL CAN
    SPLATTER ABOVE 212F.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP IMMEDIATELY & SAFELY DISCARD
    ABSORBANTS. IN EVENT OF LARGE SPILLS, DIKE AREA & PUMP MATERIAL TO
    AN EPA PERMITTED WASTE TANK.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE W/ADEQUATE VENTILATION. AVOID
    PROLONGED BREATHING OF VAPORS. AVOID PROLONGED OR REPEATED SKIN
    CONTACT. KEEP AWAY FROM EXCESSIVE HEAT.
Other Precautions:AVOID ALL SOURCES OF HEAT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQD IF AIRBORNE CONCS ARE MAINTAINED BELOW
    OCCUP EXPOS LIMS. FOR AIRBORNE CONCS HIGHER THAN SUCH LIMS WEAR A
    NIOSH APPRVD MASK FOR ORG VAP, DUST, MIST & FUMES. WHEN USING IN
    POORLY VENTED & CONF INED SPACES USE A NIOSH APPRVD FRESH-AIR
    SUPPLYING OR SCBA.
Ventilation:MAINTAIN GOOD VENTILATION TO KEEP PRODUCT VAPOR
    CONCENTRATIONS BELOW SPECIFIED TLV'S.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
    SHOWER . TO PVNT RPTD/PRLNG SKIN CONT, WEAR PROT CLTHG & BOOTS.
    BARRIER CREAMS ARE RECOMMENDED.
Work Hygienic Practices:USE GOOD PERSONAL HYGIENE PRACTICES WHILE
    WORKING W/THIS MATL. DAILY SHOWERS & CHANGE OF CLOTHES ARE
    RECOMMENDED.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.22 
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:VISCOUS LIQUID; MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID MATERIALS THAT ARE WATER REACTIVE. AVOID STRONG ALKALINE & ACIDIC
    SUBSTANCES.
Stability Condition to Avoid:EXCESS HEAT MAY CAUSE CONTAINERS TO
    RUPTURE. AVOID TEMPERATURES BELOW 40F. AVOID FREEZING CONDITIONS.
Hazardous Decomposition Products:CO, CO*2, VARIOUS HYDROCARBON, ETC, BY
    COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
    REGULATIONS CURRENTLY IN FORCE FOR THIS PRODUCT HAZARD CLASS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.